Low Alloy High Tensile Electrodes
Technical Specifications
| AWS | DIA | Description |
|---|---|---|
|
E 7015 B2L
|
2.50, 3.15, 4.00, 5.00
|
Suitable for joing of crack resistant steel, low alloy steel. It is used for welding of pipelines in oil refineries, high temperature synthetic chemical industries. Electric power plants, stream pipes of boiler tubes and super heaters.
|
|
E 7018 A1
|
2.50, 3.15, 4.00, 5.00
|
Welding of 0.5 Mo and 1 Cr Steels and similar composition Steels, High Temperature and High Pressure Boilers, Chemical Industries, Oil Refining Industries, Turbine Castings.
|
|
E 7018 B2
|
2.50, 3.15, 4.00, 5.00
|
Suitable for joing of crack resistant steel, low alloy steel. It is used for welding of pipelines in oil refineries, high temperature synthetic chemical industries.
|
|
E 7018 B2L
|
2.50, 3.15, 4.00, 5.00
|
Suitable for similar composition creep resistant steels used for Boilers, Oil Refineries , Chemical & Power Plants
Suitable To Weld SA-199/199M Gr. T11, SA 182/182M Grade F2/F11/F12
|
|
E 7018 C3L
|
2.50, 3.15, 4.00, 5.00
|
Used for weldingof nickel alloy piping, system valves and tanks. Welding of low temperature service for lcomative main frames, refineries, pipelines, equipment fabrication of pressure vessels.
|
|
E 7018 G
|
2.50, 3.15, 4.00, 5.00
|
Welding of high strength steel, heavy duty structural fabrication, fine grained, Q & T steel, pressure vessels, tanks and penstocks.
|
|
E 8015 B6
|
2.50, 3.15, 4.00, 5.00
|
Used for welding of 5% Cr, 0.5% Mo steel for high temperature application in oil refineries power plants, petrochemical plants, and fertilizer industry.
|
|
E 8015 B8
|
2.50, 3.15, 4.00, 5.00
|
Used for welding of 9% Cr, plates, pipes and tubes. It is also used for welding of 7 to 10% Cr, 1% Mo steel for general corrosion and heat resistance application. Surfacing of turbine blades valves and seat pump parts.
|
|
E 8016 B2
|
2.50, 3.15, 4.00, 5.00
|
Suitable for joining of crack resistant steel, low alloy steel. Welding of equipment in oil refineries, pipeline and high temperature synthetic chemical industries. Electric power plant/steel pipes of boilers, tubes and super heaters.
|
|
E 8016 C2
|
2.50, 3.15, 4.00, 5.00
|
It is used for welding for nickel alloy equipment, fabrication of pressure vessels, piping system, valves and tanks. Used for welding low temperature service of locomative main frames, refineries and pipelines.
|
|
E 8016 C2L
|
2.50, 3.15, 4.00, 5.00
|
Used for welding for nickel alloy equipment. Fabrication of pressure vessels, piping system, valves and tanks. Used for welding low temperature service of locomative main frames, refineries and pipelines.
|
|
E 8016G
|
2.50, 3.15, 4.00, 5.00
|
Welding of high strength steel, heavy duty structural fabrication, fine grained, Q & T steel, pressure vessels, tanks and penstocks.
|
|
E 8018 B1
|
2.50, 3.15, 4.00, 5.00
|
Joining of crakck resistant steels. low alloy steels. Welding of equipment of oil refineries, pipeline & high temperature synthetic chemical industires. Electric power plants stream pipes of boilers, tubes and super heaters.
|
|
E 8018 B2
|
2.50, 3.15, 4.00, 5.00
|
Welding of 1.25 Cr-0.5 Mo Steels in refineries , Power Plants, Chemical Plants, Pressure Vessels & Boilers. Cr and Cr Mo Bearing Steels at Elevated Temperature Service Like Steam Production Plants & Steam Pipes
|
|
E 8018 B3L
|
2.50, 3.15, 4.00, 5.00
|
Suitable for welding 2.25% Cr, 1% Mo steels. Low alloy steel boiler and pipeline repair of high tensile steel castings. Pipelines for oil refineries , power plants at service temperature upto 600°c.
|
|
E 8018 B6
|
2.50, 3.15, 4.00, 5.00
|
It is used for welding of 5% Cr, 0.5% Mo steel for high temperature application in oil refineries power plants, petrochemical plants, and fertilizer industry.
|
|
E 8018 B8
|
2.50, 3.15, 4.00, 5.00
|
It is used for welding of 9% Cr, plates, pipes and tubes. It is also used for welding of 7 to 10% Cr, 1% Mo steel for general corrosion and heat resistance application. Surfacing of turbine blades valves and seat pump parts.
|
|
E 8018 C1
|
2.50, 3.15, 4.00, 5.00
|
It is used for welding of nickel alloy equipment, fabrication of pressure vessels, piping system, valves & tanks.
|
|
E 8018 C2
|
2.50, 3.15, 4.00, 5.00
|
Used for welding for nickel alloy equipment. Fabrication of pressure vessels, piping system, valves and tanks. Used for welding low temperature service of locomative main frames, refineries and pipelines.
|
|
E 8018 C2L
|
2.50, 3.15, 4.00, 5.00
|
It is used for welding of 9% Cr, plates, pipes and tubes. It is also used for welding of 7 to 10% Cr, 1% Mo steel for general corrosion and heat resistance application. Surfacing of turbine blades valves and seat pump parts.
|
|
E 8018 C3
|
2.50, 3.15, 4.00, 5.00
|
Used for welding for nickel alloy equipment. Fabrication of pressure vessels, piping system, valves and tanks. Used for welding low temperature service of locomative main frames, refineries and pipelines.
|
|
E 8013 D3
|
2.50, 3.15, 4.00, 5.00
|
For welding 0.9% Ni & 0.5% Mo steel suitable for welding of manganese moly steel. Low alloy high tensile steel boiler tubers & boiler plates etc.
|
|
E 8018 G
|
2.50, 3.15, 4.00, 5.00
|
Welding of high strength steel, heavy duty structural fabrication, fine grained, Q & T steel, pressure vessels, tanks and penstocks.
|
|
E 8018 W2
|
2.50, 3.15, 4.00, 5.00, 6.30
|
Specially recommended for weathering steel like Corten A and B and their equivalents used in chemical, petrochemical, railway industries to resist atmospheric corrosion.
|
|
E 9018 B3
|
2.50, 3.15, 4.00, 5.00
|
Suitable for welding 2.25% Cr, 1 Mo steels. Low alloy steel boiler and pipeline operations, Joining of P5A Materials, ASTM A 335 Grade P22, A 387 Grade 22 Material.
|
|
E 9108 B3L
|
2.50, 3.15, 4.00, 5.00
|
Suitable for welding 2.25% Cr, 1% Mo steels. Low alloy steel boiler and pipeline operations.
|
|
E 9105 B9
|
2.50, 3.15, 4.00, 5.00
|
It is used for welding of 9% Cr, plates, pipes and tubes. It is also used for welding of 7 to 10% Cr, 1% Mo steel for general corrosion and heat resistance application. Surfacing of turbine blades valves and seat pump parts.
|
|
E 9018 D1
|
2.50, 3.15, 4.00, 5.00
|
Welding of grain refined steels, Q&T steel, HSLA Steel, structural fabrication, penstocks, tanks, pressure vessels.
|
|
E 9018 D3
|
2.50, 3.15, 4.00, 5.00
|
Welding of grain refined steels, Q&T steel, HSLA Steel, structural fabrication, penstocks, tanks, pressure vessels.
|
|
E 9018 G
|
2.50, 3.15, 4.00, 5.00
|
Welding of grain refined steels, Q&T steel, HSLA Steel, structural fabrication, penstocks, tanks, pressure vessels.
|
|
E 9108 M
|
2.50, 3.15, 4.00, 5.00
|
Welding of grain refined steels, Q&T steel, HSLA Steel, structural fabrication, penstocks, tanks, pressure vessels.
|
|
E 10016 G
|
2.50, 3.15, 4.00, 5.00
|
It is used for welding earth moving equipment, stream turbines, rotors of chemical plants.
|
|
E 10018 M
|
2.50, 3.15, 4.00, 5.00
|
Welding of high tensile steel such as USS-T-1. Welding of penstocks, earth moving equipment. Heavy duty structural steel, fabrication for high tensile steels.
|
|
E 11018 M
|
2.50, 3.15, 4.00, 5.00, 6.30
|
Welding of penstocks, earth moving equipment. Heavy duty structural made from high tensile steels. Pertochemical tanks & vessels.
|