| AWS | DIA | Description |
|---|---|---|
|
E 71T5-A1C
|
1.20, 1.60
|
Used for welding of similar composition of Mo steels & other creep resistant steels. Commonly used in steam power plants, marine, chemical plants & refineries.
|
|
E 81T1-A1C
|
1.20, 1.60
|
Used for welding of similar compositions of C-Mo steels. Apllication includes welding of steels such as ASTM161m A204m A302 grade A and A336 grade F1, A335-P1 pipe, A353 Gr lc1, A356 grade 2, A533 grade A1.
|
|
E 81T1-B1C
|
1.20, 1.60
|
It is used for welding of similar compositions of Cr-Mo steels & other creep resistant steels commonly used in steam power plants, ships, chemical plants & refineries.
|
|
E 81T1-B2C
|
1.20, 1.60
|
Used for welding of similar compositions of Cr-Mo steels and other resistant steels. It is also used for welding of high temperature pipe steels for oil industry.
|
|
E 80T5-B2C
|
1.20, 1.60
|
Specially design for Cr-Mo steels with high temp & pressure service conditions in steam pipes of boilers. It is used for welding of iron/0.5Mo, 0.5Cu/0.5Mo and similar creep resistance steels. e.g. ASTM A335-P11 pipe, ASTM A387 Gr.II plates.
|
|
E 81T5-B2C
|
1.20, 1.60
|
Specially design for Cr-Mo steels with high temp & pressure service conditions in steam pipes of boilers. It is used for welding of iron/0.5Mo, 0.5Cu/0.5Mo and similar creep resistance steels. e.g. ASTM A335-P11 pipe, ASTM A387 Gr.II plates.
|
|
E 80T1-B6C
|
1.20, 1.60
|
Material to be welded are plate ASTM A387 grade 9, pipe/tube ASTM A335 grade 9, ASTM A234 grade WP9 (fittings), ASTM A199 grade T9, forgings ASTM A182 grade F9, ASTM A336 grade F9, cast ASTM A217 grade C12.
|
|
E 81T1-B6C
|
1.20, 1.60
|
Material to be welded are plate ASTM A387 grade 9, pipe/tube ASTM A335 grade 9, ASTM A234 grade WP9 (fittings), ASTM A199 grade T9, forgings ASTM A182 grade F9, ASTM A336 grade F9, cast ASTM A217 grade C12.
|
|
E 81T1-Ni1C
|
1.20, 1.60
|
Often used in structural applications where excellent toughness is required. Ideal for welding welding quenched & tempered steels of HY 80 type.
|
|
E 81T1-Ni2C
|
1.20, 1.60
|
Often used in structural applications where excellent toughness is required. Ideal for welding welding quenched & tempered steels of HY 80 type. Suitable for welding of 560 n/mm² high tensile steel.
|
|
E 80T5-K1C
|
1.20, 1.60
|
It can also used be for long term stress relieved applications for welding of low alloy high strength steels in particular 1% nickel steels. Recommended for thicker section which require sub-zero impact properties.
|
|
E 80T1-K2C
|
1.20, 1.60
|
This is a welding wire for welding of high tensile steels in machinery, structures bridges etc. Steels welded are HY80, HY100, ASTM A710, ASTM A514 and similar high strength steels.
|
|
E 81T1-K2C
|
1.20, 1.60
|
Steels welded are HY80, HY100, ASTM A710, ASTM A514 and similar high strength steels.
|
|
E 81T1-W2C
|
1.20, 1.60
|
Designed for welding atmospheric corrosion resistant steel as Resco, Corton & Itacor. Suitable for joining weathering grades steels conforming to ASTM SA-588, SA-242 etc.
|
|
E 81T1-GC
|
1.20, 1.60
|
It is designed for all position single multi-pass welding of ship-building steels etc.
|
|
E 90T5-B3C
|
1.20, 1.60
|
Designed for welding creep-resisting 2.25% Cr & 1% Mo steel suitable for joining steels conforming to ASTM grade F22 of SA-182/ SA-182M & SA-336 /SA-336M, GRADE T4, F22 of SA-199 /SA-1995M, GRADE P22 of SA-335/SA-335M etc.
|
|
E 91T1-B3C
|
1.20, 1.60
|
It is used for welding of similar of CR-Mo steels and other creep resistant steels. Suitable for joining steels conforming to ASTM grade F22 of SA-182/ SA-182M & SA-336 /SA-336M, GRADE T4, F22 of SA-199 /SA-1995M, GRADE P22 of SA-335/SA-335M etc.
|
|
E 91T1-B9C
|
1.20, 1.60
|
It is recommended for welding of ASTM A213-T91 tube, A335-P91 pipe, A182/A336 F91 forgings, A217 A2 castings, A234 WP91 & A369 FP91 type material.
|
|
E 91T1-Ni2C
|
1.20, 1.60
|
Ideal for welding quenched & tempered steels of HY80 type.
|
|
E 91T1-D1C
|
1.20, 1.60
|
Used for welding steel to IS8500-91 grade 540B and 590B, IS 2002-92 grade III, IS: 1875-92 class III A or other equivalent steels.
|
|
E 90T5-D2C
|
1.20, 1.60
|
For welding of steel such as A302 Gr.B, HSLA steels and manganese-molybdenum castings, such as ASTM A49, A291 and A735 etc. To meet low temperature toughness as well as down to -50°c
|
|
E90T5-K2C
|
1.20, 1.60
|
For welding of many HSLA steels like HY-80, Naxtta 56, 63, LA60 steels conforming to ASTM grade 60, grade 65 steel of SA-515/SA-515M grade 55, grade 60, grade 65 steels of SA-516/SA-516M, all thickness range of SA-455/SA-455M etc.
|
|
E91T1-GC
|
1.20, 1.60
|
Used for high tensile, fine grain structural steels, creep resistant fine grain structural steels, heat treated fine grain structural steels.
|
|
E 100T5-D2C
|
1.20, 1.60
|
For welding of steel such as A302 Gr.B, HSLA steels and manganese-molybdenum castings, such as ASTM A49, A291 and A735 etc. To meet low temperature toughness as well as down to -40°c.
|
|
E110T1-K4C
|
1.20, 1.60
|
Addition to approximately 0.50Cr provides higher strength for many applications needing in excess of 830 n/mn² tensile strength such as "armour" plate. Typical applications include welding of HY100 and ASTM A514 steels.
|
|
E110T5-K4C
|
1.20, 1.60
|
Designed for welding of high strength, fine grained quenched & tempered steel like Naxtra 70, USS T1, T1b etc. Suitable for joining steel conforming to ASTM grade C,D of SA-225/SA-225M, grade A,B |
|
E111T1-GC
|
1.20, 1.60
|
It is primarily intended for as welded applications or welding of low alloy high strength steels. Weld metal provides excellent notch toughness at low temperature.
|
|
E 120T1-GC
|
1.20, 1.60
|
For welding of high strength fine grain structured steel having yield strength around 750 n/mn².
|
