Low Alloy High Tensile Steel Filler Wires
| AWS | DIA | Description |
|---|---|---|
|
ER 80SB2
|
0.8, 1.0, 1.2, 1.6, 2.0, 2.5, 3.15
|
Used for joining of dissimilar combination of Cr-Mo and carbon steel or used similar component of tube and pipe welding.
|
|
ER 80SB6
|
1.2, 1.6, 2.0, 2.5, 3.15
|
Used for welding material of similar composition. Usually in the form of pipe or tubing.
|
|
ER 80S2B8
|
1.2, 1.6, 2.0, 2.5, 3.15
|
It is used for welding material of similar composition. Usually in the form of pipe or tubing.
|
|
ER 80SG
|
0.8, 1.0, 1.2, 1.6, 2.0, 2.5, 3.15
|
Welding of steel structures, pie-lines, construction of machinery, pressure vessels where required strength 550 n/mn2 min.
|
|
ER 90SB3
|
0.8, 1.0, 1.2, 1.6, 2.0, 2.5, 3.15
|
Used for joining combinations of Cr-Mo and carbon steel. All GMAW modes may be used.
|
|
ER 90SB9
|
0.8, 1.0, 1.2, 1.6, 2.0, 2.5, 3.15
|
Used for welding base material of similar composition. Usually in the form of pipe or tubing.
|
|
ER 90SG
|
0.8, 1.0, 1.2, 1.6, 2.0, 2.5, 3.15
|
In general classification of material requirements for welding of steel structures, pipe lines, construction of machinery, pressure vessels.
|
|
ER 90SD2
|
1.20 , 1.60 , 2.00, 2.50, 3.15
|
Widely used for the welding of High Tensile Steels like Is 8500 Grade 540B, 570B,and 590B; Is 2002 Gr. III, Is 1875 cl. IIIA. Welding of 450 / 450H1 steel used in CONCOR wagons is a typical application for this wire.
|